Cycloidal pinwheel reducer is normally a up-dated of latest type transmissing machine designed with K-H-V less pearly whites engagement and the cycloidal pin wheel clenching mechanism, which are widely used in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, conveyors, Industry and job machinery etc. various fields.
1. Gear is made from high strength low carbon alloy steel by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is followed for all with high accuracy, good contact performance and gears
2. high transmission effectiveness: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light-weight, long service existence and high bearing ability;
5. convenient to check, assemble and disassemble.
Operation specifications and precautions
1.High modularization design: various equip with various motor or other power input conveniently.Same machine type may equip with different power motor. It really is easy to know the combination and
junction between every machine type.
2.Transmission ratio: okay division, wide scope. The combined machine type may form large transmission ratio, i.e. end result suprisingly low rotary speed.
3.Form of installation: the positioning to be installed is not limited.
4.High strength, compact: the box body is made of large strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, which means bearing capacity of unitvolume is great.
5.Long life: Under the condition of accurate type chosen (including choosing suitable operation parameters)normal operation and maintenance, the life of main parts of speed reducer (except dressed in parts) should not be significantly less than 20000 hours. The putting on parts include lubricating bearing, oil seal and oil.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is going to be low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High speed ratio and efficiency
Single stage transmission can reach to at least one 1:87 of speed-straight down ratio and the efficiency is more than 90%. If employ multi-speed travel the speed-down ratio is definitely bigger.
Being adapted epicyclic transmission theory, the input and end result shaft are in same axis middle, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is bound at the minimum content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is easy, but it can know high reduction ratio device.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved at the same time, and there are two gears engaged with 180 degree symmetry. Subsequently, the influence of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the positioning precision and rotation accuracy reach an extremely high level.
4. Less parts, easy installation
The three basic parts achieve a high deceleration ratio, and they are all on the same axis, so the kit is simple to install and easy to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the volume is 1/3, the weight is 1/2, but can obtain the same torque potential and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel materials USES specialized steel with substantial fatigue strength.Not the same as ordinary transmission machine, the number of teeth meshing accounts for in regard to 30% of the total number of teeth. Additionally, it is in contact with the surface, so that the pressure borne by each equipment is reduced and large torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the power loss due to friction. Therefore, high decrease ratio may be accomplished while maintaining high performance, and miniaturization of generating motor could be realized.
8. Low noise
The gear meshing cycle swiftness is low, the transmission movement force balance, therefore the procedure is quiet, and the vibration is very small.
◆Excessive speed ratio and great efficiency single-stage transmission can achieve a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission can be used, the deceleration ratio will end up being larger.
◆Because planetary transmission principle is adopted, the input shaft and outcome shaft are on the same axis line, so that the machine unit can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is much larger, and the mechanism of balancing machine parts produces the vibration and voice limited by a minimum.
◆Reliable use and prolonged service life because the primary parts are created from great carbon chromium steel, large strength is certainly obtained by quenching (HRC58-62), and rolling friction can be used in a few transmission contacts, therefore the service life is long.
Cycloid reducer is going to be a cycloid needle teeth meshing planetary transmission principle drive models, is a perfect transmission has various advantages, versatile, and may be both positive and negative operation.
•Big ratio, and great efficiency Smooth operation,
• low noise The make use of reliable,
• long life can reach 50000 hours
• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),
• operation and connection with rolling friction, basically no wear, durable.
• Compact structure,
• small size Because the consumption of a planetary transmission, the suggestions shaft and the end result shaft on the same axis, which makes the model to obtain the smallest possible size.
• Reasonable design, easy protection, and break down easily install,
• minimal number of parts along with straightforward lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion precision, improve the output strength and carrier.
(2).Hoop clamp coupling have five connection methods ideal for different application environments.
(3).Size over PL/PF120(incorporating)precision and high strength integral inner gear housing, processed in one station,which get rid of the cumulative mistake and assembling mistake of split type.Eliminate casting process;adopt sizzling of forging process, which will reduce the blank material defects.
(4).The meshing equipment adopt shaving method after carburizing and quenching,which simpler to make gear surface smooth and high precision,reduce the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, that have a complete norm, wide speed for selection, and many mounting positions. Its overall performance and mounting dime nsions conform the same varieties of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, compact structure, radiate heat efficiently, beautiful condition and low noise.
Great sealing and adaptability.Its combination with T gear reducer and MB/MBN variator may meet a myriad of speed requirement.